Quick answer: To get ready for professional Christmas light installation, check four things: the roofline and gutters, nearby trees and shrubs, outdoor power outlets, and the access around your home. Clean gutters, trimmed branches, working outlets, and a clear yard make the job go more smoothly and help the lights sit better. You don’t need to do anything complicated, and your installer can tell you what matters for your home. Wray’s Home Services installs Christmas lights across Central Florida, starting at $750.
Professional Christmas light installation is meant to save you work, so there isn’t much to do on your end. But a little holiday lighting preparation helps the installation go faster, and it helps your roofline lights and outdoor Christmas lights look better and last through the season.
This checklist covers what to look at before your installer arrives. At Wray’s Home Services, we install holiday lighting for homeowners across Central Florida, and these are the things that come up most.
1. Look at Your Roofline and Gutters
Roofline lights attach along the edge of your roof, so the condition of that edge matters.
- Check for loose or damaged gutters, fascia, or shingle edges. If something is broken or sagging, lights may not sit straight. Mention it to your installer, or consider repairs first.
- Clear out the gutters. Packed gutters are harder to work around, and debris can push lights out of place. If your gutters are clogged, getting them cleaned first makes sense, and it’s a good time of year to do it. (We offer gutter cleaning, too.)
- Look for moss, algae, or heavy dirt along the roofline. Surfaces that are slick or dirty are harder to work on safely. Your installer can tell you if it’s an issue.
If you notice anything unusual along the roofline, let the installer know in advance so they can plan for it.
2. Trim Trees and Shrubs
Central Florida yards fill in fast, and overgrown plants can get in the way of the lights.
- Trim branches that hang over or touch the roofline. They can block access and rub against light strands in the wind.
- Cut back shrubs near walls, windows, or entryways you want lit.
- Don’t trim near power lines yourself. Call a professional or the utility for anything close to overhead lines.
If you want lights on palms, trees, or shrubs, tell your installer ahead of time. Those are part of a full outdoor lighting design, not just the roofline.
3. Check Your Outdoor Power Outlets
Your lights need a reliable power source.
- Find your outdoor outlets. Most homes have at least one near the front, back, or garage. Make sure they work.
- Look for a GFCI outlet. Outdoor outlets are typically protected, and the reset button should work. If an outlet is dead or keeps tripping, have an electrician look at it before the installation.
- Think about where the power will run. Installers plan the layout around outlets, so tell them where you’d prefer the plug to be.
- Consider a timer. A timer or smart plug turns lights on and off automatically each day.
Don’t add extra outlets or modify wiring yourself. That’s a job for a licensed electrician.
4. Decide What You Want Lit
A little planning helps you get an accurate quote and the design you want.
- Roofline only, or a full display? Roofline lights outline the eaves and peaks. A full outdoor design can add windows, trees, shrubs, columns, and walkways.
- Light color and style. Warm white and multicolor are the most common choices. If you’re unsure, ask for suggestions.
- Photos of your home. A few daytime and evening photos of the front and sides can help with planning.
Not sure which direction to go? An installer can walk through the options with you and quote it before any work begins.
5. Clear the Area Around Your Home
- Move cars, trash bins, and outdoor furniture away from the work area.
- Put away yard decorations, hoses, and toys from along the walls and walkways.
- Make sure the crew can reach all sides of the house, including gates and side yards.
- Secure pets inside or in a safe place while the crew works.
- Let your installer know about sprinklers, pool equipment, or fragile landscaping so they can work around them.
6. Clean the Surfaces You Want Lit (Optional)
This isn’t required, but a clean exterior shows off your lights. If your driveway, walkways, or siding are stained with algae or mildew, a pressure washing before installation can make the whole house look better. We provide pressure washing, too, if you’d like both done around the same time.
7. You Don’t Need to Buy or Test Lights
With Wray’s Home Services, we supply and install the lights, so you don’t need to buy, test, or untangle anything. If you have old lights at home, you can set them aside.
Quick Checklist
- Gutters and roofline checked
- Overhanging branches trimmed
- Outdoor outlets tested
- Design decided (roofline only, or a full display)
- Yard and access cleared
- Pets and vehicles moved
How Much Does Professional Christmas Light Installation Cost?
Wray’s Home Services Christmas light installation starts at $750. The final price depends on your roofline, the height of your home, and any extras like trees, shrubs, or windows. We confirm the price with a free quote before we start. You can also see starting prices for all of our services on our home service costs page.
Professional Christmas Light Installation Across Central Florida
We install holiday lighting for homeowners throughout Central Florida, including Daytona Beach, Edgewater, Ormond Beach, New Smyrna Beach, Port Orange, Mount Dora, Deltona, Sorrento, Apopka, Eustis, Lake Mary, DeLand, DeBary, Orange City, Sanford, De Leon Springs, Lake Helen, Longwood, Heathrow, Zellwood, and Winter Springs.
To learn more, visit our professional Christmas light installation in Central Florida page.
FAQ: Preparing for Christmas Light Installation
Do I need to do anything before professional Christmas light installation?
Not much. It helps to clear the area around your home, make sure your outdoor outlets work, and trim branches near the roofline. If anything else is needed, we’ll let you know when we plan your design.
Should I clean my gutters before Christmas lights are installed?
It’s a good idea. Roofline lights attach near the gutter line, and clean gutters make the area easier and safer to work around. We offer gutter cleaning if you’d like it done first.
Do I need to provide the lights?
No. We install the lights that we supply, and we don’t install homeowner-provided lights. That keeps the look consistent across your home.
Do I need to be home during installation?
No. You don’t need to be home while we install the lights.
Do outdoor outlets need to be GFCI?
Outdoor outlets are typically GFCI-protected. If yours is dead or keeps tripping, have an electrician check it before installation.
What if my roof or gutters need repairs?
Let us know before we start. Repairs may need to happen first so the lights sit properly along the roofline.
How much does Christmas light installation cost in Central Florida?
Christmas light installation with Wray’s Home Services starts at $750. The final price depends on your home and design, and we confirm it with a free quote before we begin.
Ready to Plan Your Holiday Lights?
If you want the roofline lights and outdoor Christmas lights done without the ladder work, Wray’s Home Services can help. Request a free quote or call/text 386-287-1285.